Settings that must be configured identically to allow wireless mobility between controllers:LWAPP Transport Mode (layer 2 or layer 3)config switchconfig mode {L2|L3}Virtual IPconfig interface address virtual 1.1.1.1Mobility Tunneling Mode (symmetric or asymmetric)config mobility symmetric-tunneling {enable|disable}Mobility Security Modeconfig mobility secure-mode {enable|disable}DHCP Proxyconfig dhcp proxy {enable|disable}WLANAll parameters for the WLAN should be identical (other than security settings), including the WLAN...continue reading
Popular Posts
-
The MU to MU disallow feature allows the RF Switch to block communications exchanged between clients associated to a WLAN.With the Motorola ... -
Pre-Requisites: Requirements: The following requirements must be met prior to attempting this configuration: One (or more) RF Switc... -
RADIUS Authentication Attributes: The RADIUS protocol follows client-server architecture and uses the User Datagram Protocol (UDP) as de... -
LDAP Server can be used as the database with WS5100 radius server. This document provides the details of configuration need to done for WS5... -
WS5100 login: cli User Access Verification Username: restore Password: restoreDefaultPassword WARNING:This will wipe out the con... -
IPSec VPN offers the security and encryption features necessary to protect enterprise data, voice, and video traffic as it traverses public... -
Components Used: The information in this document is based on the following hardware and software versions: · 1 x RFS4000 Swit... -
The following section outlines the configuration steps required to configure 802.11i with 802.1X and pre-shared keys on a RF Switch: 1) ... -
Use of ARP Cache in a network device Most of the network devices will have anARP cache; the content of the same will be a collection of IP...
Social Icons
Popular Posts
-
Overview WiNG version 4.0 includes a rich suite of features which are included with each RF Switch at no additional charge as well as... -
RADIUS Authentication Attributes: The RADIUS protocol follows client-server architecture and uses the User Datagram Protocol (UDP) as de... -
Components Used: The information in this document is based on the following hardware and software versions: · 1 x RFS4000 Swit... -
Components Used: The information in this document is based on the following Motorola hardware and software versions: 1 x RFS6000 or ... -
The following section outlines the configuration steps required to configure 802.11i with 802.1X and pre-shared keys on a RF Switch: 1) ... -
Snipe-IT is a free and open source, cross-platform, feature-rich IT asset management system built using a PHP framework called Laravel ... -
Network Address Translation (NAT) provides the translation of an Internet Protocol (IP) address within one network to a different known IP ... -
I had made 5 attempts and spent 2 years studying for CCIE Wireless v1. On November 17, 2011 Cisco retired this version of the lab and moved...
-
IPSec VPN offers the security and encryption features necessary to protect enterprise data, voice, and video traffic as it traverses public... -
Should I use GUI, CLI, or both?! While preparing for the Autonomous AP portion of the CCIE Wireless lab I have come across a puzzling proble...